Ford Mustang – The First Generation

December 02, 2010 :: Posted by - admin :: Category - Filmbutiken

1964 was the banner year that Ford Motors unveiled a new breed of car at the World’s Fair in New York. With the belief that a small sports car would be the next hot ticket, Ford made strides to make it one of their automobiles. Included are the model years and the changes made year to year on these classic Mustangs.

1964 was the banner year that Ford Motors unveiled a new breed of car at the World’s Fair in New York. With the belief that a small sports car would be the next hot ticket, Ford made strides to make it one of their automobiles. Included are the model years and the changes made year to year on these classic Mustangs.

The 1964 World’s Fair in New York was the spot for the unveiling of a new breed of car. Armed with the belief that a small, powerful car would be the seller, Ford made the decision to make theirs the next hot ticket. Knowing that true success would come down to volume sales, a two-seat design was discarded and a new Ford, based on the Falcon was introduced. It was the 1965 Mustang, with plenty of options available for customers to customize their new car. With a starting price of $2320, the Mustang racked up over 22,000 in sales its first day, 417,000 in the first year, and surpassed the one million mark in March, 1966. The Pony Car now held the attention of consumers, it is the only class of muscle car that still exists and the Ford Mustang is the only original pony car to remain in production, uninterrupted.

1964-1965

The first Mustang model, the early 65 or 64½, available as a coupe or convertible, featured a base 170 cubic inch six-cylinder engine with a three-speed floor shift transmission. Optionally a 260 cubic inch V-8 engine in addition to a four-speed manual transmission or three-speed automatic Cruise-O-Matic transmission was available. 1965 was also the debut of the Shelby GT350 Street, a high-performance Fastback 2×2 Mustang, featuring a modified K-code 289cid V8 engine with 306 hp. Engine replacements were made and are often referred to as late 1965 models, switching out the 170 cubic inch with a 200 cubic inch version with increased horsepower. The 260 cubic inch was replaced with a 289 cubic inch with 200 hp, with an optional four-barrel solid-lifter which produced 225 hp, or the “Hi-Po” which generated 271 hp.

How to Identify an Early 1965 Mustang

An Early 1965 Mustang, or 1964½ to enthusiasts, was built between March 9th and July 31st 1964. Identifying features are a factory-equipped generator starting system and a generator charge light (later 65 models used ‘Alt’ light), a 170 ci V6 (U-code), a 260 V8 (F-code), or a 289 V8 (D-code) engine, large horns mounted on the frame behind the radiator, a brake light pressure switch on the master cylinder, a two-speed heater with center ‘off’ switch, and the front hood features angled edges that are not folded which were modified in the later 1965 models to a rolled front edge. Another difference is that the passenger seat in the early 1965 models was in a fixed position.

1966-1968

Slight moderate changes to the 1966 Mustang were to the grille and wheel covers, along with a new instrument cluster and revised side scoops featuring chrome trim and three wind-splits. 1966 was also the year that the millionth Mustang was sold. Changes to the 1967 Mustang were major going for a more muscular and aggressive look and feel. Changes include a full Fastback roofline, longer nose, triple tail lamps, a wider chassis and bigger grille. The release of the Shelby GT500 with a 428 cubic inch V-8 with 355 hp was also in 1967. 1967 was also the last year the Ford block letting appeared across the front edge of first generation Mustangs (The lettering was re-added in 1974). 1968 saw the release of the 302 cubic inch V-8 engine to replace the older “Hi-Po”, with a mid-year release of the 427 cubic inch engine, along with the 428 Cobra Jet engine aimed at racing enthusiasts. Front and back side markers and shoulder belts were also added to the 1968 model in accordance with Federal regulations, and this was the first year that the rear view mirror attached to the windshield instead of the frame.

1969

Body style changes in 1969 included a longer body for a more aggressive muscle car appearance. The title Fastback was dropped and Sportsroof was adopted. A new 302 cubic inch engine with more than 220 hp was released, and a 351 cubic inch Windsor generating 250 hp with a two-barrel carburetor or 290 hp with a four-barrel. Special-Edition Mustangs available in 1969 were the Boss 302, 429, Shelby GT350, GT500 and the Mach 1, all with performance engines.

1970-1973

Changes to the 1970 Mustang were minimal with only the addition of a ram air Shaker hood scoop. The 1971 model was a foot longer than earlier Mustangs making this the biggest Mustang and heaviest by 600 pounds. The Mach 1 was the only special edition Mustang to make the cut and remain in the line-up. 1972 saw no changes to the body style, while the Sprint model, featuring red, white, and blue exterior paint and tape styling was released. In 1973Health Fitness Articles, the fuel shortage and newly introduced emissions standards brought an end to the muscle car era; designers moved away from the Falcon platform and discontinued the convertible.

This is seen as the end of the first generation Mustang.

Source: Free Articles from ArticlesFactory.com

ABOUT THE AUTHOR

James grew up coveting classic Mustangs with the idea that he would one day own one from each year. While that didn’t work out as planned, James was able to assemble an online Mustang parts site to make sure that those who are restoring their Mustangs can find their parts and accessories. Find Mustang Parts http://www.restoremustangs.com